SAM - Metric sizes - igus

CAD model selection

	1
	2
	3
	4
	5
	6
	7

		LINA Bill of material	ARTNR Part no. ⁿ/ₐ	CNSMASSEXACT Weight [g]	DK Maximum Static Axial Tensile Strength Short term [N]	DL Maximum Static Axial Tensile Strength Long term [N]	D1 Spherical Washer Diameter [mm]	D3 Housing Pad Diameter [mm]	D2 Diameter [mm]	H1 Spherical Washer [mm]	H2 Housing Pad [mm]	H Total height [mm]	R1 Radius [mm]	AW1 Compensation Angle [°]

		SAM-05	SAM-05	0.9	4.000	2.000	5.2	7.0	15	3.0	3.5	4.7	15	3
		SAM-06	SAM-06	1.1	5.000	2.500	6.2	7.5	16	3.0	4.0	5.3	16	3
		SAM-08	SAM-08	2.2	8.000	4.000	8.2	10.0	20	4.0	5.0	6.8	20	2
		SAM-10	SAM-10	3.4	10.000	5.000	10.2	12.0	24	4.5	5.5	7.5	24	2
		SAM-12	SAM-12	5.9	12.000	6.000	12.5	14.5	30	5.0	6.0	8.0	32	2
		SAM-16	SAM-16	8.5	17.000	8.500	16.5	19.0	36	5.5	6.5	8.7	40	2
		SAM-20	SAM-20	12.8	22.000	11.000	20.2	23.0	44	6.0	7.0	8.6	45	2

Additional Information

Users who viewed this, were also interested in

KGLM LC - Metric sizes, Low-Cost

KGLM LC - Metric sizes, Low-Costigus 20.07.2021

WFRM - Trapezoidal Lead Screw Nuts

WFRM - Trapezoidal Lead Screw Nutsigus 13.09.2022

iglidur® G - type S - metric sizes

iglidur® G - type S - metric sizesigus 08.11.2023

DryLin® SLW - XY-Table

DryLin® SLW - XY-Tableigus 12.09.2022

AWMU - Supported Aluminium Shaft, mm

AWMU - Supported Aluminium Shaft, mmigus 12.09.2022

Single rail - Square

Single rail - Squareigus 09.09.2022

JSRM-AB - Anti-Backlash-Gewindemuttern, aus iglidur® J, Rechtsgewindeiglidur® J – bester Verschleiß im Trockenlauf

JSRM-AB - Anti-Backlash-Gewindemuttern, aus iglidur® J, Rechtsgewindeiglidu...igus 13.09.2022

PTGSG-R/L - Counter rotating lead screws

PTGSG-R/L - Counter rotating lead screwsigus 13.09.2022

PTGSG - Single start Trapezoidal Lead Screws

PTGSG - Single start Trapezoidal Lead Screwsigus 13.09.2022

DryLin® TWBM - Manual clamping with high holding strength

DryLin® TWBM - Manual clamping with high holding strengthigus 08.09.2022

RJUM-11 - Lineargleitlager, mm

RJUM-11 - Lineargleitlager, mmigus 20.07.2021

WAF - Shaft End Block, mm

WAF - Shaft End Block, mmigus 12.09.2022

FJUM-01 - Round Flange, mm

FJUM-01 - Round Flange, mmigus 12.09.2022

JUM-02 - Liner, extra short, mm

JUM-02 - Liner, extra short, mmigus 20.07.2021