$ {catalogItem}-$ {catalogLabel}

??

CAD모델 선택

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

		LINA BOM	CNSORDERNO Catalogue Number ⁿ/ₐ	PINFO Product information ⁿ/ₐ	U Ratio ⁿ/ₐ	Z Number of Teeth ⁿ/ₐ	MOD Module ⁿ/ₐ	D Reference Diameter [mm]	DA2 da2 [mm]	DA Outside Diameter [mm]	A Locating Distance [mm]	DD Bore Diameter [mm]	DH Hub Diameter [mm]	LH Hub Projection [mm]	L Bore Lenght [mm]	LW Overall lenght [mm]	LA Tip Distance [mm]	B Face Width [mm]	M Nominal threads ⁿ/ₐ	LS Position of Set Screw [mm]	DEG Angle [°]	MIN Angle [min]	MASS Weight [g]

		ML80SU20-1605	ML80SU20-1605	-	1	20	0.80	16.0	0.00	17.13	16	5	14.5	7.25	10.0	10.95	8.57	3.7	M2.5	3.0	49	3	10.2
		ML1SU20-2106	ML1SU20-2106	-	1	20	1.00	20.0	0.00	21.41	21	6	16.0	9.00	13.0	14.48	11.71	4.3	M3	4.0	49	3	18.6
		ML1SU30-2808	ML1SU30-2808	-	1	30	1.00	30.0	0.00	31.41	28	8	24.0	11.00	16.0	17.84	13.71	6.2	M4	5.0	47	42	54.3
		ML1.5SU20-3010	ML1.5SU20-3010	-	1	20	1.50	30.0	0.00	32.12	30	10	24.0	12.00	18.5	20.38	16.06	6.8	M4	5.0	49	3	57.3
		ML1.5SU25-3412	ML1.5SU25-3412	-	1	25	1.50	37.5	0.00	39.62	34	12	30.0	12.50	19.0	21.11	16.31	7.5	M5	5.5	48	51	94
		ML2SU20-3715	ML2SU20-3715	-	1	20	2.00	40.0	42.00	41.32	37	15	34.0	14.00	21.0	23.85	19.07	8.5	M5	6.0	49	3	121.5
		ML1S20-2108	ML1S20-2108	Discontinued	1	20	1.00	20.0	0.00	21.41	21	8	18.0	10.00	13.0	14.48	11.71	4.3	M3	4.0	49	3	19.5
		ML1.5S20-3010	ML1.5S20-3010	Discontinued	1	20	1.50	30.0	0.00	32.12	30	10	24.0	12.00	18.5	20.38	16.06	6.8	M4	5.0	49	3	54.6
		ML1.5S25-3412	ML1.5S25-3412	Discontinued	1	25	1.50	37.0	0.00	39.62	34	12	30.0	12.50	19.0	21.11	16.31	7.5	M5	5.5	48	51	93.4
		ML2S20-3715	ML2S20-3715	Discontinued	1	20	2.00	40.0	42.00	41.32	37	15	34.0	14.00	21.0	23.85	18.41	8.5	M5	5.5	49	3	119.2
		ML2.5S20-4820	ML2.5S20-4820	Discontinued	1	20	2.50	50.0	53.00	51.86	48	20	42.0	19.00	28.0	31.86	24.77	11.1	M6	7.5	49	3	236.6
		ML1S20-2108N	ML1S20-2108N	-	1	20	1.00	20.0	0.00	21.41	21	8	18.0	10.00	13.0	14.48	11.71	4.3	2-M3	4.0	49	3	19.5
		ML1.5S20-3010N	ML1.5S20-3010N	-	1	20	1.50	30.0	0.00	32.12	30	10	24.0	12.00	18.5	20.38	16.06	6.8	2-M4	5.0	49	3	54.6
		ML1.5S25-3412N	ML1.5S25-3412N	-	1	25	1.50	37.5	0.00	39.62	34	12	30.0	12.50	19.0	21.11	16.31	7.5	2-M5	5.5	48	51	93.4
		ML2S20-3715N	ML2S20-3715N	-	1	20	2.00	40.0	42.83	41.32	37	15	34.0	14.00	21.0	23.85	18.41	8.5	2-M5	6.0	49	3	119.2
		ML2.5S20-4820N	ML2.5S20-4820N	-	1	20	2.50	50.0	53.54	51.66	48	20	42.0	19.00	28.0	31.86	24.77	11.1	2-M6	7.5	49	3	236.6

추가 정보

이 사용자는 또한에 관심이있는 사용자를 보았습니다.

KYOUIKU GEAR MFG, CO., LTD.

Bevel Gears - Module 5

Bevel Gears - Module 5KYOUIKU GEAR MFG, CO., LTD. 25.04.2023

KYOUIKU GEAR MFG, CO., LTD.

Miter GearsKYOUIKU GEAR MFG, CO., LTD. 14.09.2023

KYOUIKU GEAR MFG, CO., LTD.

Miter Gears - Module 1.5

Miter Gears - Module 1.5KYOUIKU GEAR MFG, CO., LTD. 26.06.2023

KYOUIKU GEAR MFG, CO., LTD.

B-SETKYOUIKU GEAR MFG, CO., LTD. 14.09.2023

KHK KOHARA GEAR

Ground Spiral Miter Gears (MMSGQ)

Ground Spiral Miter Gears (MMSGQ)KHK KOHARA GEAR 17.06.2021

KYOUIKU GEAR MFG, CO., LTD.

Miter Gears - Module 0.8

Miter Gears - Module 0.8KYOUIKU GEAR MFG, CO., LTD. 31.05.2024

KYOUIKU GEAR MFG, CO., LTD.

Helical Gears and Screw Gears

Helical Gears and Screw GearsKYOUIKU GEAR MFG, CO., LTD. 14.09.2023

Conical straight toothed gears type A 1:1 module 1,5

Conical straight toothed gears type A 1:1 module 1,5Haberkorn 19.07.2021

KHK KOHARA GEAR

Hardened Miter Gears (SMC)

Hardened Miter Gears (SMC)KHK KOHARA GEAR 12.04.2024

KYOUIKU GEAR MFG, CO., LTD.

Miter Gears - Module 2

Miter Gears - Module 2KYOUIKU GEAR MFG, CO., LTD. 26.06.2023

KYOUIKU GEAR MFG, CO., LTD.

Fine Cut Spiral Gears - Module 1.5

Fine Cut Spiral Gears - Module 1.5KYOUIKU GEAR MFG, CO., LTD. 25.04.2023

KYOUIKU GEAR MFG, CO., LTD.

Miter Gears - Module 1

Miter Gears - Module 1KYOUIKU GEAR MFG, CO., LTD. 26.06.2023

KYOUIKU GEAR MFG, CO., LTD.

Miter Gears - Module 0.5

Miter Gears - Module 0.5KYOUIKU GEAR MFG, CO., LTD. 13.05.2024

Non-Preloaded Type BTK-V

Non-Preloaded Type BTK-VTHK CO.,LTD. 23.05.2024