Inch series - Jtekt North America

??

Selección de modelo CAD

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Lista de materiales	DESIGNATION Bearings Designation ⁿ/ₐ	SD SD - Shaft Dia. [mm]	D D - Outside Diameter [mm]	T T - Total Bearing Width [mm]	B B - Inner Ring Width [mm]	C C - Outer Ring Width [mm]	R r - Radius [mm]	R1 r1 - Radius [mm]	CR C - Basic Dynamic Load Rating [kN]	CO C0 - Basic Static Load Rating [kN]	CU Cu - Fatigue Load Limit [kN]	NG Limiting Speed (Grease) [rpm]	NO Limiting Speed (Oil) [rpm]

		A2037/126	A2037/126	9.525	31.991	10.008	10.785	7.938	1.2	1.2	13.4	9.30	1.25	14000	19000
		A2047/126	A2047/126	11.986	31.991	10.008	10.785	7.938	0.8	1.2	13.4	9.30	1.25	14000	19000
		A4050/138	A4050/138	12.700	34.988	10.998	10.988	8.730	1.2	1.2	15.7	11.9	1.55	12000	17000
		A4059/138	A4059/138	14.989	34.988	10.998	10.988	8.730	0.8	1.2	15.7	11.9	1.55	12000	17000
		L21549/11	L21549/11	15.875	34.988	10.998	10.998	8.712	1.2	1.2	18.1	14.3	1.90	12000	16000
		03062/162	03062/162	15.875	41.275	14.288	14.681	11.112	1.2	2.0	27.3	20.5	2.85	11000	14000
		17580R/20	17580R/20	15.875	42.862	16.670	16.670	13.495	1.6	1.6	38.2	29.5	4.15	10000	14000
		09062/195	09062/195	15.875	49.225	19.845	21.539	14.288	0.8	1.2	47.2	37.7	5.40	8900	12000
		21063/212	21063/212	15.875	53.975	22.225	21.839	15.875	0.8	2.4	52.6	41.2	5.65	8400	11000
		HM81649/10	HM81649/10	16.000	47.000	21.000	21.000	16.000	1.0	2.0	45.4	37.7	5.05	9800	13000
		LM11749R/10	LM11749R/10	17.462	39.878	13.843	14.605	10.668	1.2	1.2	31.8	26.0	3.60	11000	14000
		LM11949/10	LM11949/10	19.050	45.237	15.494	16.637	12.065	1.2	1.2	36.8	30.1	4.25	9400	13000
		09067/196	09067/196	19.050	49.225	19.845	21.539	14.288	1.2	1.6	47.2	37.7	5.40	8900	12000
		09078/195	09078/195	19.050	49.225	21.209	19.050	17.462	1.2	1.2	47.2	37.7	5.40	8900	12000
		07079/196	07079/196	20.000	50.005	13.495	14.260	9.525	1.6	1.0	33.3	28.8	4.05	7900	11000
		12580/20	12580/20	20.638	49.225	19.845	19.845	15.875	1.6	1.6	45.5	37.7	5.35	8600	12000
		M12649/10	M12649/10	21.430	50.005	17.526	18.288	13.970	1.2	1.2	48.8	40.7	5.80	8500	11000
		LM12749/11	LM12749/11	21.987	45.974	15.494	16.637	12.065	1.2	1.2	37.5	34.6	4.85	8900	12000
		M12648/10	M12648/10	22.225	50.005	17.526	18.288	13.970	1.2	1.2	48.8	40.7	5.80	8500	11000
		1380/28	1380/28	22.225	52.388	19.368	20.168	14.288	1.6	1.6	45.9	37.9	5.45	8000	11000
		1380/29	1380/29	22.225	53.975	19.368	20.168	14.288	1.6	1.6	45.9	37.9	5.45	8000	11000
		1755/29	1755/29	22.225	56.896	19.368	19.837	15.875	1.2	1.2	50.0	43.1	6.20	7600	10000
		1280/20	1280/20	22.225	57.150	22.225	22.225	17.462	0.8	1.6	65.8	55.7	8.05	7600	10000
		2684/31	2684/31	22.225	66.421	23.812	25.433	19.050	1.6	1.2	83.8	75.2	11.2	6500	8700
		LM72849/10	LM72849/10	22.606	47.000	15.500	15.500	12.000	1.6	1.0	35.0	32.8	4.45	8700	12000

Additional Information

Los usuarios que vieron esto, también se interesaron en

BS2_001 - Spherical roller bearings

BS2_001 - Spherical roller bearingsSKF 06.06.2024

Jtekt North America

Metric seriesJtekt North America 13.12.2018

BT1_001_101 - Tapered roller bearings, single row

BT1_001_101 - Tapered roller bearings, single rowSKF 06.06.2024

JTEKT Corporation(Koyo)

Inch seriesJTEKT Corporation(Koyo) 16.01.2019

NTN Corporation

Inch system sizes

Inch system sizesNTN Corporation 17.10.2023

NSK Rolling Bearing

Metric DesignNSK Rolling Bearing 07.06.2024

Brennan Industries

0304 - Standard Nut

0304 - Standard NutBrennan Industries 28.01.2021

JTEKT Corporation(Koyo)

Metric seriesJTEKT Corporation(Koyo) 20.09.2019

BB1_001_101 - Deep groove ball bearings

BB1_001_101 - Deep groove ball bearingsSKF 13.06.2024

Jtekt North America

TDO typeJtekt North America 13.12.2018

BC1_001_101 - Cylindrical roller bearings, single row

BC1_001_101 - Cylindrical roller bearings, single rowSKF 06.06.2024

MICHAUD CHAILLY - Direct Transmission

Modèle R1-02 - Roulement rigide à billes avec 2 flasques (2Z)

Modèle R1-02 - Roulement rigide à billes avec 2 flasques (2Z)MICHAUD CHAILLY - Direct Transmission 24.02.2023

Jtekt North America

With machined cage

With machined cageJtekt North America 13.12.2018

Chinese Manufacturers

GB/T288-94 20000C - Rolling bearings-Self-aligning roller bearings-Boundary dimensions

GB/T288-94 20000C - Rolling bearings-Self-aligning roller bearings-Boundary...Chinese Manufacturers 21.05.2014