Open Ends - JTEKT Corporation(Koyo)

??

Výběr CAD modelu

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Kusovník	ORDER Bearing No. ⁿ/ₐ	FW Inside Diameter [mm]	D Outside Diameter [mm]	C Bearing Width [mm]	CR Basic dynamic load rating [kN]	CO Basic static load rating [kN]	CU Fatigue limit load [kN]	NO Limiting speeds (Oil) [rpm]

		HK0306	HK0306	3	6.5	6	1.20	0.78	0.13	46000
		HK0408	HK0408	4	8.0	8	1.88	1.38	0.20	39000
		HK0509	HK0509	5	9.0	9	2.52	2.07	0.32	36000
		HK0608	HK0608	6	10.0	8	2.34	1.95	0.29	33000
		HK0609	HK0609	6	10.0	9	3.14	2.85	0.29	33000
		HK0709	HK0709	7	11.0	9	3.23	3.05	0.47	32000
		HK0808	HK0808	8	12.0	8	2.90	2.73	0.40	31000
		HK0810	HK0810	8	12.0	10	3.95	4.07	0.60	31000
		HK0910	HK0910	9	13.0	10	4.57	5.07	0.77	30000
		HK0912	HK0912	9	13.0	12	5.65	6.65	1.00	30000
		HK1010	HK1010	10	14.0	10	4.78	5.51	0.84	29000
		HK1012	HK1012	10	14.0	12	5.90	7.23	1.10	29000
		HK1015	HK1015	10	14.0	15	7.49	9.81	1.50	29000
		HK1210	HK1210	12	16.0	10	5.24	6.55	0.89	28000
		HK1212	HK1212	12	18.0	12	6.61	7.29	1.10	22000
		HK1312	HK1312	13	19.0	12	6.92	7.89	1.20	22000
		HK1412	HK1412	14	20.0	12	7.21	8.50	1.30	21000
		HK1512	HK1512	15	21.0	12	7.49	9.11	1.40	21000
		HK1516	HK1516	15	21.0	16	10.70	14.40	2.20	21000
		HK1522	HK1522	15	21.0	22	13.50	19.40	2.95	21000
		HK1612	HK1612	16	22.0	12	7.76	9.72	1.50	21000
		HK1616	HK1616	16	22.0	16	11.10	15.30	2.35	21000
		HK1622	HK1622	16	22.0	22	13.40	19.50	2.95	21000
		HK1712	HK1712	17	23.0	12	8.12	10.40	1.60	20000
		HK1812	HK1812	18	24.0	12	8.41	11.10	1.70	18000

Additional Information

Uživatelé, kteří si toto prohlížení prohlíželi, se také zajímali

JTEKT Corporation(Koyo)

Closed One EndJTEKT Corporation(Koyo) 22.12.2017

NTN Corporation

HK,HK..ZWD,HMK,HMK..ZWD (Open-end)

HK,HK..ZWD,HMK,HMK..ZWD (Open-end)NTN Corporation 17.10.2023

JTEKT Corporation(Koyo)

Shielded ZZ, ZZX

Shielded ZZ, ZZXJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

K, KZWJTEKT Corporation(Koyo) 22.12.2017

IKO (NIPPON THOMPSON CO.,LTD)

for Shell Type Needle Roller Bearings-Metric Series (IRT)

for Shell Type Needle Roller Bearings-Metric Series (IRT)IKO (NIPPON THOMPSON CO.,LTD) 21.06.2020

BND_001 - Drawn cup needle roller bearings

BND_001 - Drawn cup needle roller bearingsSKF 06.06.2024

JTEKT Corporation(Koyo)

AXK, FNT Series

AXK, FNT SeriesJTEKT Corporation(Koyo) 22.12.2017

JTEKT Corporation(Koyo)

Open EndsJTEKT Corporation(Koyo) 22.12.2017

IKO (NIPPON THOMPSON CO.,LTD)

Outer Ring (GS)

Outer Ring (GS)IKO (NIPPON THOMPSON CO.,LTD) 21.06.2020

NSK Rolling Bearing

Non-Contact Sealed Type VV

Non-Contact Sealed Type VVNSK Rolling Bearing 07.06.2024

NTN Corporation

With double shield ZZ

With double shield ZZNTN Corporation 17.10.2023

NTN Corporation

Contact Sealed type LLU

Contact Sealed type LLUNTN Corporation 17.10.2023

Essentra Components

HK-01002B - Dowel Pins - Smooth

HK-01002B - Dowel Pins - SmoothEssentra Components 23.07.2014

JTEKT Corporation(Koyo)

Open endsJTEKT Corporation(Koyo) 22.12.2017