Open type-with the Cage - NSK Rolling Bearing

??

Výběr CAD modelu

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Kusovník	ORDER Order number ⁿ/ₐ	FW Inscribed circle diameter [mm]	D Outer Diameter [mm]	C Width [mm]	CR Basic Dynamic Load Ratings [N]	PMAX Limiting Loads [N]	LS Limiting Speeds [1/min]	MASS Mass [g]	BGR1 Matching inner rings ⁿ/ₐ	BGR2 Matching inner rings ⁿ/ₐ

		JH-68	JH-68	9.525	15.875	12.70	6650	3000	38000	8.2	-	-
		J-78	J-78	11.112	15.875	12.70	5800	3100	30000	6.4	-	-
		JH-78	JH-78	11.112	17.462	12.70	7150	3300	30000	9.1	-	-
		J-85	J-85	12.700	17.462	7.92	3150	1440	26000	5.4	-	-
		J-88	J-88	12.700	17.462	12.70	6350	3500	26000	7.3	-	-
		J-812	J-812	12.700	17.462	19.05	10100	6450	26000	7.7	-	-
		JH-87	JH-87	12.700	19.050	11.13	6450	2930	26000	9.5	-	-
		JH-88	JH-88	12.700	19.050	12.70	7600	3600	26000	10.0	-	-
		JH-812	JH-812	12.700	19.050	19.05	12400	6800	26000	15.0	-	-
		J-97	J-97	14.288	19.050	11.13	5350	2860	22000	7.3	-	-
		J-98	J-98	14.288	19.050	12.70	6250	3500	22000	8.2	IR-68	-
		J-910-F	J-910-F	14.288	19.050	15.88	8200	5000	22000	9.1	-	-
		JH-98	JH-98	14.288	20.638	12.70	8050	3950	24000	11.0	IR-68	-
		JH-912-F	JH-912-F	14.288	20.638	19.05	13100	7350	24000	14.0	-	-
		J-108	J-108	15.875	20.638	12.70	6750	3950	20000	8.6	IR-68-1	-
		J-1010	J-1010	15.875	20.638	15.88	8850	5600	20000	10.0	-	-
		J-1012	J-1012	15.875	20.638	19.05	11600	8050	20000	13.0	IR-612-1	-
		JH-1010	JH-1010	15.875	22.225	15.88	11600	6400	20000	15.0	-	-
		JH-1016	JH-1016	15.875	22.225	25.40	19900	12800	20000	25.0	-	-
		J-1112	J-1112	17.462	22.225	19.05	11500	8050	18000	16.0	-	-
		JH-1110	JH-1110	17.462	23.812	15.88	12100	6850	19000	16.0	-	-
		JH-1112	JH-1112	17.462	23.812	19.05	15000	9000	19000	17.0	-	-
		J-126	J-126	19.050	25.400	9.52	5950	2800	17000	8.2	-	-
		J-128	J-128	19.050	25.400	12.70	10000	5450	17000	12.0	IR-88	-
		J-1210	J-1210	19.050	25.400	15.88	12600	7250	17000	16.0	-	-

Additional Information

Uživatelé, kteří si toto prohlížení prohlíželi, se také zajímali

NSK Rolling Bearing

InchNSK Rolling Bearing 07.06.2024

NSK Rolling Bearing

RNANSK Rolling Bearing 07.06.2024

NSK Rolling Bearing

All Rolling-Open Type

All Rolling-Open TypeNSK Rolling Bearing 07.06.2024

NSK Rolling Bearing

Closed end-with the Cage

Closed end-with the CageNSK Rolling Bearing 07.06.2024

JTEKT Corporation(Koyo)

Open EndsJTEKT Corporation(Koyo) 22.12.2017

NSK Rolling Bearing

metric (FIR) 5-220 mm

metric (FIR) 5-220 mmNSK Rolling Bearing 07.06.2024

NSK Rolling Bearing

Metric DesignNSK Rolling Bearing 07.06.2024

NSK Rolling Bearing

HJNSK Rolling Bearing 07.06.2024

NSK Rolling Bearing

RLMNSK Rolling Bearing 07.06.2024

Jtekt North America

NTA - Inch Series - Thrust Bearings Assemblies Washers

NTA - Inch Series - Thrust Bearings Assemblies WashersJtekt North America 13.12.2018

NSK Rolling Bearing

SingleNSK Rolling Bearing 07.06.2024

Jtekt North America

TRA - Inch Series - Thrust Bearings Assemblies Washers

TRA - Inch Series - Thrust Bearings Assemblies WashersJtekt North America 13.12.2018

NSK Rolling Bearing

Metric-All rolling-open type

Metric-All rolling-open typeNSK Rolling Bearing 07.06.2024

NSK Rolling Bearing

Shielded Type ZZ

Shielded Type ZZNSK Rolling Bearing 07.06.2024