With machined cages - Jtekt North America

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	DESIGNATION Bearing Designation ⁿ/ₐ	SD SD - Shaft Dia. [mm]	D D - Outside Diameter [mm]	B B - Bearing Width [mm]	R r - Radius [mm]	R1 r1 - Radius [mm]	CR C - Basic Dynamic Load Rating [kN]	CO C0 - Basic Static Load Rating [kN]	CU Cu - Fatigue Load Limit [kN]	NG Limiting Speed (Grease) [rpm]	NO Limiting Speed (Oil) [rpm]

		7900CDB FY	7900CDBFY	10	22	12	0.3	0.1	6.10	3.05	0.120	42000	55000
		7000BDB FY	7000BDBFY	10	26	16	0.3	0.1	9.40	4.35	0.220	20000	27000
		7000DB FY	7000DBFY	10	26	16	0.3	0.1	10.1	4.65	0.240	27000	34000
		7000CDB FY	7000CDBFY	10	26	16	0.3	0.1	10.7	4.95	0.250	37000	50000
		7200BDB FY	7200BDBFY	10	30	18	0.6	0.3	8.70	4.05	0.210	18000	23000
		7200DB FY	7200DBFY	10	30	18	0.6	0.3	9.50	4.40	0.230	23000	29000
		7200CDB FY	7200CDBFY	10	30	18	0.6	0.3	10.2	4.70	0.240	32000	43000
		7300DB FY	7300DBFY	10	35	22	0.6	0.3	17.3	7.55	0.590	21000	27000
		7901CDB FY	7901CDBFY	12	24	12	0.3	0.1	6.45	3.45	0.140	37000	49000
		7001BDB FY	7001BDBFY	12	28	16	0.3	0.1	10.1	5.05	0.260	18000	23000
		7001DB FY	7001DBFY	12	28	16	0.3	0.1	11.0	5.45	0.280	23000	29000
		7001CDB FY	7001CDBFY	12	28	16	0.3	0.1	11.8	5.85	0.300	32000	43000
		7201BDB FY	7201BDBFY	12	32	20	0.6	0.3	14.0	6.80	0.480	16000	22000
		7201DB FY	7201DBFY	12	32	20	0.6	0.3	15.1	7.25	0.560	22000	27000
		7201CDB FY	7201CDBFY	12	32	20	0.6	0.3	16.0	7.70	0.600	30000	40000
		7301DB FY	7301DBFY	12	37	24	1.0	0.6	20.7	9.20	0.720	20000	24000
		7902CDB FY	7902CDBFY	15	28	14	0.3	0.1	9.65	5.30	0.210	31000	41000
		7002BDB FY	7002BDBFY	15	32	18	0.3	0.1	11.3	6.30	0.320	15000	20000
		7002DB FY	7002DBFY	15	32	18	0.3	0.1	12.4	6.85	0.350	20000	26000
		7002CDB FY	7002CDBFY	15	32	18	0.3	0.1	13.4	7.40	0.380	28000	37000
		7202BDB FY	7202BDBFY	15	35	22	0.6	0.3	15.1	7.85	0.520	14000	19000
		7202DB FY	7202DBFY	15	35	22	0.6	0.3	16.4	8.55	0.600	19000	24000
		7202CDB FY	7202CDBFY	15	35	22	0.6	0.3	17.6	9.15	0.680	26000	35000
		7302DB FY	7302DBFY	15	42	26	1.0	0.6	25.4	12.9	0.990	16000	20000
		7903CDB FY	7903CDBFY	17	30	14	0.3	0.1	10.1	5.90	0.240	28000	38000

Additional Information

Users who viewed this, were also interested in

JTEKT Corporation(Koyo)

With machined cages

With machined cagesJTEKT Corporation(Koyo) 16.01.2019

KM - Locknut - For axial locking

KM - Locknut - For axial lockingHPC 17.02.2022

NSK Rolling Bearing

Back-to-Back DB

Back-to-Back DBNSK Rolling Bearing 07.06.2024

MB - Stop washer - For KM locknut

MB - Stop washer - For KM locknutHPC 17.02.2022

Jtekt North America

With pressed cages

With pressed cagesJtekt North America 13.12.2018

Jtekt North America

Open typeJtekt North America 13.12.2018

Jtekt North America

With machined cage

With machined cageJtekt North America 13.12.2018

BA1_010 - Angular contact ball bearings, super-precision

BA1_010 - Angular contact ball bearings, super-precisionSKF 06.06.2024

NSK Rolling Bearing

SingleNSK Rolling Bearing 07.06.2024

Jtekt North America

With machined cages

With machined cagesJtekt North America 13.12.2018

JTEKT Corporation(Koyo)

With pressed cages

With pressed cagesJTEKT Corporation(Koyo) 16.01.2019

Jtekt North America

With machined cages

With machined cagesJtekt North America 13.12.2018

NSK Rolling Bearing

Tandem DTNSK Rolling Bearing 07.06.2024

Nachi-Fujikoshi

Duplex Mounting (DF) - Face-to-face

Duplex Mounting (DF) - Face-to-faceNachi-Fujikoshi 07.02.2019